The analytical and artificial intelligence methods to investigate the effects of aperture dimension ratio on electrical shielding effectiveness
Abstract
This paper presents that the effect of single aperture size of metallic enclosure on electrical shielding effectiveness (ESE) at 0 – 1 GHz frequency range has been investigated by using both Robinson’s analytical formulation and artificial neural networks (ANN) methods that are multilayer perceptron (MLP) networks and a radial basis function neural network (RBFNN). All results including measurement have been compared each other in terms of aperture geometry of metallic enclosure. The geometry of single aperture varies from square to rectangular shape while the open area of aperture is fixed. It has been observed that network structure of MLP 3-40-1 in modeling with ANN modeled with fewer neurons in the sense of overlapping of faults and data and modeled accordingly. In contrast, the RBFNN 3-150-1 is the other detection that the network structure is modeled with more neurons and more. It can be seen from the same network-structured MLP and RBFNN that the MLP modeled better. In this paper, the impact of dimension of rectangular aperture on shielding performance by using RBFNN and MLP network model with ANN has been studied, as a novelty.References
REFERENCES
M.P. Robinson, T.M. Benson, C. Christopoulos, J.F. Dawson, M.D. Ganley, A.C. Marvin and et. al. “Analytical formulation for the shielding effectiveness of enclosures with apertures,” IEEE Transactions on Electromagnetic Compatibility, Vol. 40, No. 3, pp.240-248, 1998. doi: 10.1109/15.709422
A. Kumar, S. Marwaha, A. Singh, A. Marwaha, “Comparative leakage field analysis of electromagnetic devices using finite element and fuzzy methods,” Expert Systems with Applications Vol. 37, No.5, pp.3827-3834. 2010. doi: 10.1016/j.eswa.2009.11.036
H. Azizi,F.T. Belkacem, D. Moussaoui, H. Moulai, A. Bendaoud, M. Bensetti, “Electromagnetic interference from shielding effectiveness of a rectangular enclosure with apertures–circuital approach, FDTD and FIT modeling,” Journal of Electromagnetic Waves and Applications, Vol. 28, No.4, 494-514, 2014. doi: 10.1080/09205071.2013.875862
K.F.A. Hussein, “Spatial Filter Housing for Enhancement of the Shielding Effectiveness of Perforated Enclosures with Lossy Internal Coating: Broadband Characterization,” International Journal of Antennas and Propagation, Vol. 2013, No. 353647, 2013. doi: 10.1155/2013/353647
C. Jiao, L. Li, X. Cui, H. Li, “Subcell FDTD analysis of shielding effectiveness of a thin-walled enclosure with an aperture,” IEEE Transactions on Magnetics Vol. 42, No.4,pp.1075-1078, 2016. doi: 10.1109/TMAG.2006.871638
J.Z. Lei, C. H. Liang, Y. Zhang, “Study on shielding effectiveness of metallic cavities with apertures by combining parallel FDTD method with windowing technique,” Progress In Electromagnetics Research, Vol. 74, pp.85-112, 2007. doi: 10.2528/PIER07041905
Q.F. Liu, W.Y. Yin, M.F. Xue, J.F. Mao, Q.H. Liu, “Shielding characterization of metallic enclosures with multiple slots and a thin-wire antenna loaded: Multiple oblique EMP incidences with arbitrary polarizations,” IEEE Transactions on Electromagnetic Compatibility Vol. 51, No.2, pp.284-292, 2009. doi: 10.1109/TEMC.2008.2011891
M. Bahadorzadeh,A.L. Neyestanak, A, “Novel and Efficient Technique for Improving Shielding Effectiveness of a Rectangular Enclosure using Optimized Aperture Load,” Elektronika ir Elektrotechnika, Vol. 18, No.10, pp.89-92, 2012. doi: 10.5755/j01.eee.18.10.3071
V. Milutinović, T. Cvetković, N. Doncov, B. Milovanović, “Circuital and Numerical Models for Calculation of Shielding Effectiveness of Enclosure with Apertures and Monitoring Dipole Antenna Inside,” Radioengineering, Vol. 22, No.4, pp.1249-1257, 2013.
B.L. Nie, P.A. Du, Y.T. Yu, Z. Shi, “Study of the shielding properties of enclosures with apertures at higher frequencies using the transmission-line modeling method,” IEEE Transactions on Electromagnetic Compatibility Vo. 53, No. 1,pp.73-81, 2011. doi: 10.1109/TEMC.2010.2047398
R. Araneo, G. Lovat, “An efficient MoM formulation for the evaluation of the shielding effectiveness of rectangular enclosures with thin and thick apertures,” IEEE Transactions on Electromagnetic Compatibility, Vol. 50, No.2, pp.294-304, 2008. doi: 10.1109/TEMC.2008.919031
R. Araneo, G. Lovat, “Fast MoM analysis of the shielding effectiveness of rectangular enclosures with apertures, metal plates, and conducting objects,” IEEE Transactions on Electromagnetic Compatibility Vol. 51, No.2, pp.274-283, 2009. doi: 10.1109/TEMC. 2008.2010456
P. Dehkhoda, A. Tavakoli, M. Azadifar, “Shielding effectiveness of an enclosure with finite wall thickness and perforated opposing walls at oblique incidence and arbitrary polarization by GMMoM,” IEEE Transactions on Electromagnetic Compatibility Vol. 54, No.4, pp.792-805, 2012. doi: 10.1109/TEMC. 2012.2188855
X.C. Nie, N. Yuan, “Accurate modeling of monopole antennas in shielded enclosures with apertures,” Progress in Electromagnetics Research Vol. 79, pp.251-262, 2008. doi: 10.2528/PIER07100403
G. Wu, X.G. Zhang, B. Liu, “A hybrid method for predicting the shielding effectiveness of rectangular metallic enclosures with thickness apertures,” Journal of Electromagnetic Waves and Applications, Vol. 24, No.8-9, pp.1157-1169, 2012. doi: 10.1163/156939310 791585972
M.F. Xue, W.Y. Yin, Q.F. Liu, J.F. Mao, “Wideband pulse responses of metallic rectangular multistage cascaded enclosures illuminated by an EMP,” IEEE Transactions on Electromagnetic Compatibility Vol. 50, No.4, pp.928-939, 2008. doi: 10.1109/TEMC. 2008.927943
Z.B. Zhao, X. Cui, L. Li, B. Zhang, “Analysis of the shielding effectiveness of rectangular enclosure of metal structures with apertures above ground plane,” IEEE Transactions on Magnetics, Vol. 41, No.5, pp.1892-1895, 2005. doi: 10.1109/TMAG.2005.846275
V. Devabhaktuni, C.F. Bunting, D. Green, D. Kvale, L. Mareddy, V. Rajamani, “A new ANN-based modeling approach for rapid EMI/EMC analysis of PCB and shielding enclosures,” IEEE Transactions on Electromagnetic Compatibility, Vol. 55, No.2, pp.385-394. doi: 10.1109/TEMC.2012.2214223
S. Coco, A. Laudani, F.R. Fulginei, A. Salvini, “A new neural predictor for ELF magnetic field strength,” IEEE Transactions on Magnetics, Vol. 50, No.2, pp.69-72, 2014. doi: 10.1109/TMAG.2013.2283022
H. Gargama, S.K. Chaturvedi, A.K. Thakur, “Reliability-based design optimization of electromagnetic shielding structure using neural networks and real-coded genetic algorithm,” In Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science Vol. 228, No.18, pp.3471-3481, 2014. doi: 10.1177/0954406214529556
N. Umurkan, S. Koroglu, O. Kilic, A. Adam, “A neural network based estimation method for magnetic shielding at extremely low frequencies,” Expert Systems with Applications Vol. 37, No. 4, pp.3195-3201, 2011. doi:10.1016/j.eswa.2009.09.062
S. Koroglu, N. Umurkan, O. Kilic, F. Attar, “An approach to the calculation of multilayer magnetic shielding using artificial neural network,” Simulation Modelling Practice and Theory, Vol. 17, No.7, pp. 1267-1275, Aug. 2009. doi:10.1016/j.simpat.2009.05.001
S. Koroglu, P. Sergeant, N. Umurkan, “Comparison of analytical, finite element and neural network methods to study magnetic shielding,” Simulation Modelling Practice and Theory, Vol. 18, No.2, pp.206-216, 2010. doi: 10.1016/j.simpat.2009. 10.007
M. Luo, K. M. Huang, “Prediction of the electromagnetic field in metallic enclosures using artificial neural networks,” Progress In Electromagnetics Research, Vol. 116, pp.171-184, Jan. 2011. doi: 10.2528/PIER11031101
D. Sha, V.B. Bajić, “An on-line hybrid learning algorithm for multilayer perceptron in identification problems,” Computers & Electrical Engineering Vol. 28, No.6, pp.587-598, 2002.
F.T. Belkacem, M. Bensetti, M. Laour, A. Boutar, M. Djennah, D. Moussaoui and et al, “The analytical, numerical and neural network evaluation versus experimental of electromagnetic shielding effectiveness of a rectangular enclosure with apertures,” In Proceedings of the IEEE 9th International Conference on Cybernetic Intelligent Systems (CIS) 2010, Reading, UK:1-6. doi: 10.1109/UKRICIS.2010.5898122
G. Cybenko, “Approximations by super positions of sigmoidal functions, Mathematics of Control, Signals, and Systems, Vol. 2, No.4, pp.303-314, 1989. doi: 10.1007/bf02551274
D.E. Rumelhart, G.E. Hinton, R.J. Williams, “Learning Internal Represantations by Error Propagation. In Parallel Distributed Processing,” MIT Press, ICS Report (Datasheet), Technical rept. Mar-Sep. 1988. doi: 10.21236/ada164453
N. P.Thanh, Y. S. Kung, S.C. Chen, H.H. Chou, “Digital hardware implementation of a radial basis function neural network,” Computers & Electrical Engineering, Vol. 53, pp.106-121, 2016..
Q.J. Zhang, K.C. Gupta.” Neural Networks For RF and Microwave Design,” Artech House Publisher, Norwood, MA, 2000.
E. Sağıroğlu, E. Beşdok,M. Erler, Mühendislikte YAPAY ZEKA Uygulamaları - I / Yapay Sinir Ağları. Ufuk Yayınları, Ankara, 2003.
Downloads
Published
Issue
Section
License
Copyright (c) 2019 International Journal of Electronics and Telecommunications
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
1. License
The non-commercial use of the article will be governed by the Creative Commons Attribution license as currently displayed on https://creativecommons.org/licenses/by/4.0/.
2. Author’s Warranties
The author warrants that the article is original, written by stated author/s, has not been published before, contains no unlawful statements, does not infringe the rights of others, is subject to copyright that is vested exclusively in the author and free of any third party rights, and that any necessary written permissions to quote from other sources have been obtained by the author/s. The undersigned also warrants that the manuscript (or its essential substance) has not been published other than as an abstract or doctorate thesis and has not been submitted for consideration elsewhere, for print, electronic or digital publication.
3. User Rights
Under the Creative Commons Attribution license, the author(s) and users are free to share (copy, distribute and transmit the contribution) under the following conditions: 1. they must attribute the contribution in the manner specified by the author or licensor, 2. they may alter, transform, or build upon this work, 3. they may use this contribution for commercial purposes.
4. Rights of Authors
Authors retain the following rights:
- copyright, and other proprietary rights relating to the article, such as patent rights,
- the right to use the substance of the article in own future works, including lectures and books,
- the right to reproduce the article for own purposes, provided the copies are not offered for sale,
- the right to self-archive the article
- the right to supervision over the integrity of the content of the work and its fair use.
5. Co-Authorship
If the article was prepared jointly with other authors, the signatory of this form warrants that he/she has been authorized by all co-authors to sign this agreement on their behalf, and agrees to inform his/her co-authors of the terms of this agreement.
6. Termination
This agreement can be terminated by the author or the Journal Owner upon two months’ notice where the other party has materially breached this agreement and failed to remedy such breach within a month of being given the terminating party’s notice requesting such breach to be remedied. No breach or violation of this agreement will cause this agreement or any license granted in it to terminate automatically or affect the definition of the Journal Owner. The author and the Journal Owner may agree to terminate this agreement at any time. This agreement or any license granted in it cannot be terminated otherwise than in accordance with this section 6. This License shall remain in effect throughout the term of copyright in the Work and may not be revoked without the express written consent of both parties.
7. Royalties
This agreement entitles the author to no royalties or other fees. To such extent as legally permissible, the author waives his or her right to collect royalties relative to the article in respect of any use of the article by the Journal Owner or its sublicensee.
8. Miscellaneous
The Journal Owner will publish the article (or have it published) in the Journal if the article’s editorial process is successfully completed and the Journal Owner or its sublicensee has become obligated to have the article published. Where such obligation depends on the payment of a fee, it shall not be deemed to exist until such time as that fee is paid. The Journal Owner may conform the article to a style of punctuation, spelling, capitalization and usage that it deems appropriate. The Journal Owner will be allowed to sublicense the rights that are licensed to it under this agreement. This agreement will be governed by the laws of Poland.
By signing this License, Author(s) warrant(s) that they have the full power to enter into this agreement. This License shall remain in effect throughout the term of copyright in the Work and may not be revoked without the express written consent of both parties.
